Home ProductsPvc Shrink Film Bags

Ral Colours Pure Polyester Powder Coat Paint Good Adhesion Electrostatic Spray

Ral Colours Pure Polyester Powder Coat Paint Good Adhesion Electrostatic Spray

    • small.img.alt
    • small.img.alt
    • small.img.alt
    • small.img.alt
    • small.img.alt
  • large.img.alt

    Product Details:

    Place of Origin: SUZHOU

    Payment & Shipping Terms:

    Price: Negotiable
    Contact Now
    Detailed Product Description
    Average Coverage: 8-10m³/kg Health And Safety: Non-toxic
    Packing: Carton Heat Resistance: 110°C/24 Hours(white)
    High Light:

    epoxy powder paint


    polyester powder paint

    Ral Colours Pure Polyester Powder Coat Paint Good Adhesion Electrostatic Spray


    Ral Colours Pure Polyester Powder Coating

    Thermosetting Powder Coatings

    1. General introduction:

    Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.
    2. Feature:

    1). The products are non-toxic, solvent-free and non-toxic volatile substances,
    there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws.
    2). Raw material utilization is high, the highest utilization rate even more than
    3). After being pre-coated handle, disposable construction, without primer,
    you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs.
    4). Dense coating adhesion, good impact strength and toughness, high
    coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties.
    5). Powder coatings storage and transport are safety and convenience.

    3. Product series:

    The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.

    4. Powder physical properties:

    Proportion : 1.2-1.8 (depending on the color and gloss ) .

    Particle size distribution: 100% less than 125 microns (more than 85%
    between 60 to 90).


    Curing conditions:200°C,10 minutes.

    5. Average coverage:

    8-10m³/kg, the membrane is 60μm
    (calculate by 100% utilization rate of powder coating).

    6. Packing:

    Carton packaging, lined with double polyethylene bag, net weight 20 kg.

    7. Storage requirements:

    Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

    8. Health and safety:

    This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.

    9. Coating performance
    Coating performance
    Test items Inspection standards Test indicators
    High light Glazed/Matte/Low light
    Impact resistance ISO6272 GB/T1732-1993 50kg/cm 40kg/cm
    Cupping test ISO1520 GB/T9753-1988 8mm 7mm
    The adhesion (grid method) ISO2409 GB/T9286-1998 0
    Bending ISO1519 GB/T6742-1986 2mm 3mm
    Pencil Hardness ASTMD3363 GB/T6739-1996 1H-2H
    Salt spray test ISO7253 GB/T1771-1991 >500 hours
    Damp heat test ISO6270 GB/T1740-1979 >1000 hours
    Heat resistance 110°C/24 hours(white) Good gloss retention,E≤0.3-0.4
    Florida weathering exposure ISO2810 South 45 °,12mons Gloss retention≥50%
    Artificial accelerated aging 60°C/8hours + 50°C/4hours condensing,cycle for 500hours Gloss retention≥50% Color stability:E≤0.35
    Annotate: 1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
      2.The above coating performance may be lower as shiny and slightly lower.


    10.Why choose our products?

    1). We have our own factory. The good quality and the competitive is the advantage of our company.
    2). The material we choose is always good and products always come out with high quality.
    3). A trial order or sample orders are welcomed.
    4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
    5). We will do our best to service you all the time if you have the further question.


    Contact Details
    Suzhou Qiu Sheng Commercial Equipment Co.,ltd

    Contact Person: mr young

    Send your inquiry directly to us (0 / 3000)

    Other Products